Tom219 Posted May 26, 2010 Share Posted May 26, 2010 I've recently downloaded a kit mod to make kits bigger on the match screen, but I can't get them to work. Does anyone know where I'll have to extract it in the skin for it to work? Thanks. edit: Here is the mod I downloaded - http://rapidshare.com/files/300937251/mod_bk_2010.rar Link to post Share on other sites More sharing options...
michaeltmurrayuk Posted May 26, 2010 Share Posted May 26, 2010 If they are xml files they'll need to go into the panels folder for the skin you are using, you'll then need to turn the skin cache off and reload your skin for the changes to apply. Link to post Share on other sites More sharing options...
Tom219 Posted May 26, 2010 Author Share Posted May 26, 2010 Thanks, I've done that now and copied 'match incidents' and 'match incidents small' to the panels folder. But, the only half of the kit is there, does anyone know if i have to copy anything else? Link to post Share on other sites More sharing options...
Tom219 Posted May 29, 2010 Author Share Posted May 29, 2010 Bit of an update. I've managed to sort it out on the information screen, but on the split vire screen this is coming up, any ideas? http://i48.tinypic.com/2cmrkab.png Link to post Share on other sites More sharing options...
michaeltmurrayuk Posted May 29, 2010 Share Posted May 29, 2010 You'll need to do the same thing you did for the non-split view just editing the small version of the file this time. Link to post Share on other sites More sharing options...
Tom219 Posted May 30, 2010 Author Share Posted May 30, 2010 You'll need to do the same thing you did for the non-split view just editing the small version of the file this time. All I did for the kits to work was extract them to the panels folder, so I'm not sure what I'll have to edit for the split screen view to work aswell. Can you please expand on your point michaelmurrayuk? Link to post Share on other sites More sharing options...
michaeltmurrayuk Posted May 30, 2010 Share Posted May 30, 2010 The kit size in the split view is controlled by the 'match incidents small.xml' file you'll need to edit these three lines: <widget class="table" id="tntb" layout="100,-60,-15" mode="fill_rows, stripe_rows" auto_size_rows="true" stretch_to_fit_rows="true" row_spacing="0"> <container height="80" width="80" col="0" row="0"> <container class="kit_picture" id="mitp" scale_picture="true" height="80" width="80"/> For the first two lines you need to change the sizes I've highlighted in red, whilst for the last line you need to add some code to tell the game what size you want the kit (green text). On the last line you put in the size you want your kit and on the second and third lines you need to enter sizes that are greater than the kit so it fits. Link to post Share on other sites More sharing options...
Tom219 Posted May 30, 2010 Author Share Posted May 30, 2010 I've followed your intrustions michaeltmurrayuk, but it's still not working. Now no kits are coming up and there's an 'XML Passing Error'. But, I was unsure on where I put in the size of the kit I want could you direct me? The config looks like this now - http://i45.tinypic.com/23kc2t2.png Link to post Share on other sites More sharing options...
michaeltmurrayuk Posted May 30, 2010 Share Posted May 30, 2010 That looks ok you just need a space between the scale_pitcture, height and width codes. Link to post Share on other sites More sharing options...
Tom219 Posted May 30, 2010 Author Share Posted May 30, 2010 I added a space and an XML passing error still comes up, I think it's because i didn't put in the size of the kit I wanted as I didn't know where to put it, where should it go? Link to post Share on other sites More sharing options...
Silent Alarm Posted May 30, 2010 Share Posted May 30, 2010 Take a look at this thread: http://community.sigames.com/showthread.php?t=166835 it worked fine for me. Link to post Share on other sites More sharing options...
Tom219 Posted May 30, 2010 Author Share Posted May 30, 2010 That's what I downloaded, but the kits don't work properly in split screen. Link to post Share on other sites More sharing options...
Silent Alarm Posted May 31, 2010 Share Posted May 31, 2010 Oh sorry I wasn't aware that you were having a problem with it in split screen view. In that case I don't have a clue, sorry. Link to post Share on other sites More sharing options...
michaeltmurrayuk Posted May 31, 2010 Share Posted May 31, 2010 Download this file: http://sites.google.com/site/michaeltmurrayuk/files/matchincidentssmall.xml?attredirects=0&d=1 (make sure it is named 'match incidents small.xml') and copy it into the panels folder for the skin you are using so it overwrites the file that isn't working. If that doesn't work then the problem is elsewhere as the file works for me, can you post up a screenshot of the xml error? I've set the kit sizes to 200 pixels in that file, so if you want them a different size you'll need to adjust the values. Link to post Share on other sites More sharing options...
Tom219 Posted May 31, 2010 Author Share Posted May 31, 2010 Thanks a bunch michaelmurrayuk, I know a lot of people wouldn't of had the paitence to stick with my problem and I apprciate it greatly, thanks once agaain! Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.