temporaryeggs Posted December 19, 2020 Share Posted December 19, 2020 Hi, I'm not sure if this is the right forum to ask this, but it's graphics related so here goes. I really don't like having player in my team with blanked out faces, so I went online to find out what to do. I found these instructions : "If you have the cut out of the player, you need to drag and drop the image (make sure it's a .png image else the game won't recognise it. ) into the facepack folder you currently have. Then open the config file in that folder with note (windows) or textedit (mac) or similar programs. You will be greeted with (if you don'y understand code) alot of what look like rubbish, but alot of lines that look the same but with different numbers. Example : <record from="29086182" to="graphics/pictures/person/29086182/portrait"/> What you have to do is find the players unique ID (UID) via the editor. In this case Josh Hunt-Lauren ID is 28094200. So in the existing config, copy and paste the bottom line but change the last numbers to Josh Hunt-Lauren's UID. So now, it should look like this : <record from="28094200" to="graphics/pictures/person/28094200/portrait"/> Make sure you save and then reload your skin and it his face should now appear in game." I followed these instructions, but when I looked for the unique player id I couldn't find it. Any ideas would be much appreciated. Thanks! Link to post Share on other sites More sharing options...
a31632 Posted December 19, 2020 Share Posted December 19, 2020 27 minutes ago, temporaryeggs said: Hi, I'm not sure if this is the right forum to ask this, but it's graphics related so here goes. I really don't like having player in my team with blanked out faces, so I went online to find out what to do. I found these instructions : "If you have the cut out of the player, you need to drag and drop the image (make sure it's a .png image else the game won't recognise it. ) into the facepack folder you currently have. Then open the config file in that folder with note (windows) or textedit (mac) or similar programs. You will be greeted with (if you don'y understand code) alot of what look like rubbish, but alot of lines that look the same but with different numbers. Example : <record from="29086182" to="graphics/pictures/person/29086182/portrait"/> What you have to do is find the players unique ID (UID) via the editor. In this case Josh Hunt-Lauren ID is 28094200. So in the existing config, copy and paste the bottom line but change the last numbers to Josh Hunt-Lauren's UID. So now, it should look like this : <record from="28094200" to="graphics/pictures/person/28094200/portrait"/> Make sure you save and then reload your skin and it his face should now appear in game." I followed these instructions, but when I looked for the unique player id I couldn't find it. Any ideas would be much appreciated. Thanks! In “preferences” in your game you can tick the option to “show unique ID’s” after this in your header with the name it will now show your players ID#. After this you follow the procedure as described. Save the edited configuration file and (important) reload the skin. It might be needed to empty cache prior, all depends on the situation. Link to post Share on other sites More sharing options...
temporaryeggs Posted December 19, 2020 Author Share Posted December 19, 2020 1 minute ago, a31632 said: In “preferences” in your game you can tick the option to “show unique ID’s” after this in your header with the name it will now show your players ID#. After this you follow the procedure as described. Save the edited configuration file and (important) reload the skin. It might be needed to empty cache prior, all depends on the situation. Thanks, but I already did that. I know the number, but it's not there. Link to post Share on other sites More sharing options...
a31632 Posted December 19, 2020 Share Posted December 19, 2020 5 minutes ago, temporaryeggs said: Thanks, but I already did that. I know the number, but it's not there. Maybe this to obvious😎, but did you rename the player picture name to the ID#, moved it to your folder with other player pictures? Also make sure it is in “pgn” format not jpg or similar and the extension “png” isn’t capitalized Link to post Share on other sites More sharing options...
temporaryeggs Posted December 19, 2020 Author Share Posted December 19, 2020 1 minute ago, a31632 said: Maybe this to obvious😎, but did you rename the player picture name to the ID#, moved it to your folder with other player pictures? Also make sure it is in “pgn” format not jpg or similar and the extension “png” isn’t capitalized You have to rename the picture to the ID number? I didn't do that, it didn't say that in the original instructions I followed. The format is lower case png though. Let me try again... Link to post Share on other sites More sharing options...
temporaryeggs Posted December 19, 2020 Author Share Posted December 19, 2020 I renamed the file, put it into the correct folder, but the id still doesn't show up when I try to edit the config file...All the numbers are in chronological order, and the number isn't where it should be. Link to post Share on other sites More sharing options...
a31632 Posted December 19, 2020 Share Posted December 19, 2020 (edited) 21 minutes ago, temporaryeggs said: You have to rename the picture to the ID number? I didn't do that, it didn't say that in the original instructions I followed. The format is lower case png though. Let me try again... If this still doesn’t work after renaming the picture and moving it to the player faces folder, consider using an “xml tool”. They have been around for over 10 years and create automatically a good config file. You should Google “fmxml”, link added below You must have made an error in the config file creation EDIT: https://www.fmscout.com/a-fmXML-for-windows.html Edited December 19, 2020 by a31632 Link to post Share on other sites More sharing options...
temporaryeggs Posted December 19, 2020 Author Share Posted December 19, 2020 2 minutes ago, a31632 said: If this still doesn’t work after renaming the picture and moving it to the player faces folder, consider using an “xml tool”. They have been around for over 10 years and create automatically a good config file. You should Google “fmxml” as I think that is the name of it. You must have made an error in the config file creation Dude, thanks for your patience and help! I think I'll have a stab at it tomorrow, because in my part of the world, it's nearly bed time. Have a good one! Link to post Share on other sites More sharing options...
BenitoBendito Posted December 19, 2020 Share Posted December 19, 2020 If I'm understanding this and you cant find your players UID in your config file, then you need to add it, add a line like this in your config file where both of the numbers in green are your players UID (easiest just to copy and past a line and change the numbers) Link to post Share on other sites More sharing options...
temporaryeggs Posted December 20, 2020 Author Share Posted December 20, 2020 7 hours ago, BenitoBendito said: If I'm understanding this and you cant find your players UID in your config file, then you need to add it, add a line like this in your config file where both of the numbers in green are your players UID (easiest just to copy and past a line and change the numbers) It worked!!! Hallelujah! I'm not tech savy at all, so I appreciate all the help. Hope your next match is a win. ; ) Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now