Brasillmatic Posted November 25, 2020 Share Posted November 25, 2020 (edited) So I was trying to create a Pro/Rel structure in the US, as so many have before. I created the bare bones structure in basic rules, verified the rules, all worked fine. I changed it over to advanced rules, attempted to verify it again (without making any modifications) and got a 'wrong number of teams error'. In previous years with MLS teams, this error has come around when future teams (Austin, Charlotte in this year's case) were included in the structure, so I went ahead and erased the rules, removed them from my pyramid and made them extinct, then went ahead and recreated my league structure. Same error still comes up. Then I figured it might have been something with the playoff structure, so I started over without one; same issue. I did notice, however, with the playoff that the number of teams missing varied, even with the exact same file. Anybody have any help on this? Do I have to fully remove MLS/Austin/Charlotte as opposed to simply making them extinct? Anything would be super helpful. Thanks in advance! Photos attached below are with Austin and Charlotte, with playoffs, but exact same file ran twice. Never had two different results come back for the same file before. usa pro rel test.fmf Edited November 25, 2020 by Brasillmatic spelling Link to post Share on other sites More sharing options...
alian62 Posted November 26, 2020 Share Posted November 26, 2020 usually its the relegation/promotions that cause this with the dates . Have a look at the dates when each league starts and finishes along with pro/rel 1 Link to post Share on other sites More sharing options...
krlenjushka Posted November 26, 2020 Share Posted November 26, 2020 Probably caused by required teams section. Delete that list and try again. 1 Link to post Share on other sites More sharing options...
Dorochai Posted November 26, 2020 Share Posted November 26, 2020 7 hours ago, krlenjushka said: Probably caused by required teams section. Delete that list and try again. did it and Serbian superleagues is fixed, but problem with first league along with "no squad" issue... Link to post Share on other sites More sharing options...
Brasillmatic Posted November 27, 2020 Author Share Posted November 27, 2020 23 hours ago, alian62 said: usually its the relegation/promotions that cause this with the dates . Have a look at the dates when each league starts and finishes along with pro/rel Checked the dates, all competitions ended in May and started in August, including the playoffs 16 hours ago, krlenjushka said: Probably caused by required teams section. Delete that list and try again. Deleted the required teams list, didn't change anything. Maybe I could just delete the requirement in the competition, but I don't want my league to suddenly be smaller... Should I adjust the minimum and ignore it? Link to post Share on other sites More sharing options...
krlenjushka Posted November 27, 2020 Share Posted November 27, 2020 3 hours ago, Brasillmatic said: Deleted the required teams list, didn't change anything. Maybe I could just delete the requirement in the competition, but I don't want my league to suddenly be smaller... Should I adjust the minimum and ignore it? Check is your league set to flexible mode - not fixed. 1 Link to post Share on other sites More sharing options...
Brasillmatic Posted November 27, 2020 Author Share Posted November 27, 2020 Turns out the required teams list was the right solution - at first I hadn't seen there was box to disable it, I had just deleted the list itself. Thanks for all your help krlenjushka! Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now