cleiria Posted August 23, 2021 Share Posted August 23, 2021 Witch fm? Link to post Share on other sites More sharing options...
JorgenSrna Posted August 24, 2021 Share Posted August 24, 2021 10 hours ago, cleiria said: Witch fm? 20 Link to post Share on other sites More sharing options...
cleiria Posted August 24, 2021 Share Posted August 24, 2021 I don’t have fm20 installed. In fm21 it work. Link to post Share on other sites More sharing options...
JorgenSrna Posted August 25, 2021 Share Posted August 25, 2021 On 24/08/2021 at 17:17, cleiria said: I don’t have fm20 installed. In fm21 it work. Well I have got it to work, but then the euro qualifies are completely gone Link to post Share on other sites More sharing options...
animal31 Posted October 19, 2021 Share Posted October 19, 2021 Does anyone here know how to actually edit the Euro qualifying to fit extra created nations? Link to post Share on other sites More sharing options...
Xavier Lukhas Posted October 25, 2021 Share Posted October 25, 2021 (edited) Le 19/10/2021 à 07:03, animal31 a dit : Does anyone here know how to actually edit the Euro qualifying to fit extra created nations? Nah. To be more accurate, I've been there: at the moment, there's no known way of summoning Euro qualifying rules and modify them to accommodate for more or fewer nations. Well, one could also redo every international tournaments in the game due to dependencies that break everything if you dare touch the rules. If there's a way, I've never seen nor heard of it, and I've tried pretty hard. I'd love to be wrong, but I doubt I am unfortunately. Edited October 25, 2021 by Xavier Lukhas Link to post Share on other sites More sharing options...
Wolf_pd Posted October 25, 2021 Share Posted October 25, 2021 Extra created nations is an issue as Europa is maximized at 54 or 55 nations for qualifiers. I have redone pretty much everything for my IC20 mod, but that was tough working out how everything works. You can rebuild things, but it is hard to make it comparable to SI's work. Also, my rebuild was with a lot less nations. Link to post Share on other sites More sharing options...
Roy Race 9 Posted October 27, 2021 Share Posted October 27, 2021 On 26/10/2021 at 10:09, Wolf_pd said: Extra created nations is an issue as Europa is maximized at 54 or 55 nations for qualifiers. I have redone pretty much everything for my IC20 mod, but that was tough working out how everything works. You can rebuild things, but it is hard to make it comparable to SI's work. Also, my rebuild was with a lot less nations. yes indeed and you find that once you get one comp edited if it is linked to another in some way it causes problems, the knock on effect can make the project not worth the effort you only become aware of the issues when you attempt something like you did...its fun isnt it Link to post Share on other sites More sharing options...
animal31 Posted October 29, 2021 Share Posted October 29, 2021 Guess im recreating the World Cup and Olympics from scratch Link to post Share on other sites More sharing options...
Monsi9958 Posted October 29, 2021 Share Posted October 29, 2021 It's not necessary to recreate WC and Olympics. You have 2 possibilities if you have only one created nation : 1 simple and 1 more complicated. The simple method is to use only basic rules. The more complicated method is to create a file with Euro Q and WCQ (Europe) combined thanks to notepad+. But if you have more than 1 created nation, the second method is necessary. Personally, I have only used the simple way. Link to post Share on other sites More sharing options...
animal31 Posted October 29, 2021 Share Posted October 29, 2021 Do we know if its just the Euro Nations League, Euro Qualifying and Euro World Cup Qualifying? Or is everything else going to break? Link to post Share on other sites More sharing options...
Monsi9958 Posted October 30, 2021 Share Posted October 30, 2021 You have to change Euro Nations League first. And add your new country in the list. I have put mine instead of Kazakhstan. It's the simplest method but you have to use 2 files (your normal file + the new Nations league one ) when you play a new game. Euro qualifying is linked to European NL. Concerning WC Qualifying, it's necessary to change them if you use the second method. Link to post Share on other sites More sharing options...
animal31 Posted November 4, 2021 Share Posted November 4, 2021 So I guess the question is, Is anyone going to start on a 56 team Europe for november 9th or should I? Cause I have to work on a Canadian database first Link to post Share on other sites More sharing options...
Juventus Posted November 11, 2021 Share Posted November 11, 2021 Has is it changed? The "Test Rules" is greyed out after importing. Link to post Share on other sites More sharing options...
animal31 Posted November 23, 2021 Share Posted November 23, 2021 You have to create a seperate database, create an international league of some kind, convert to advanced rules, and then merge in the database you want to make. That way it recognizes your new league, you can delete the duplicates Also, it looks like the nations league is the only one needed to be fixed https://community.sigames.com/forums/topic/558963-fm22-isle-of-man-complete-database-released-now/?do=findComment&comment=13327054 Link to post Share on other sites More sharing options...
rusty217 Posted December 28, 2021 Share Posted December 28, 2021 Hey, for FM22 at least there's another way to make it a bit simpler, no XML editing needed. Load up the competition you want in advanced rules as described in the OP, then click onto the competition so your on the rules page, with "Description" "File" "Type" etc. Choose the Edit menu at the top and select copy. Then choose File > Load Database and either create new continental/international rules, or load an existing set. Go into advanced rules to the List section, click "Add", click the "Show Rules For" drop down menu and select "Other" at the bottom, click onto the "Rules" tab so you have "Description" etc. displayed, choose Edit at the top and then paste. No XMLs needed, and it's possible to add extra continental/international competitions to existing database files. 1 Link to post Share on other sites More sharing options...
krlenjushka Posted December 28, 2021 Author Share Posted December 28, 2021 3 hours ago, rusty217 said: Hey, for FM22 at least there's another way to make it a bit simpler, no XML editing needed. Load up the competition you want in advanced rules as described in the OP, then click onto the competition so your on the rules page, with "Description" "File" "Type" etc. Choose the Edit menu at the top and select copy. Then choose File > Load Database and either create new continental/international rules, or load an existing set. Go into advanced rules to the List section, click "Add", click the "Show Rules For" drop down menu and select "Other" at the bottom, click onto the "Rules" tab so you have "Description" etc. displayed, choose Edit at the top and then paste. No XMLs needed, and it's possible to add extra continental/international competitions to existing database files. Can you explain this with pictures - i will add it to original post. Link to post Share on other sites More sharing options...
rusty217 Posted December 28, 2021 Share Posted December 28, 2021 (edited) On 28/12/2021 at 16:46, krlenjushka said: Can you explain this with pictures - i will add it to original post. I'll give it a go Set a nation for the competition you want to extract. In this case European Champions Cup is set to Serbia. After that add nation rules ---> choose Serbia and select "Add lower divisions and cups". You will get Basic Rules screen - you need to convert to advanced rules. After converting click the "Show Rules For" drop down box and choose your competition, in this case the European Champions Cup. Click on the competition. Then select "Edit" > "Copy". Now re-load the database. Select "No" when asked if you want to load unsaved changes. Add Club Continental (or International, in which case you can skip to converting to advanced rules) rules. Add 2 nations to the Qualification System (any nations will do as long as they're the right continent). Now convert to advanced rules. Once in advanced rules untick the "Enabled" box on the nations screen. Go to the List screen, click the "Add" button and then select your new "Other" rules from the "Show Rules For" drop down box. Click on the "Rules" section and then choose "Paste" from the Edit menu. Now you have your continental club or international competition loaded in advanced rules. Finally, don't forget to add the competition under Continent/International > Competitions Edited January 2, 2023 by rusty217 6 Link to post Share on other sites More sharing options...
krlenjushka Posted December 28, 2021 Author Share Posted December 28, 2021 Great! This is maybe possible on earlier versions. Never realised "copy" option works after loading database. 1 Link to post Share on other sites More sharing options...
petepompei Posted January 18, 2022 Share Posted January 18, 2022 (edited) @rusty217 @krlenjushka Hi there, I'm trying to edit the World Cup (I only want to change the substitutes rule). I can't set the nation on my editor. Can you let me know what I'm doing wrong please? Cheers Edit - Sorted: Deleted all sub folders in the editor 22 folder. Edited January 18, 2022 by petepompei Found a solution Link to post Share on other sites More sharing options...
krlenjushka Posted January 18, 2022 Author Share Posted January 18, 2022 Have you messed up with editor? Link to post Share on other sites More sharing options...
petepompei Posted January 18, 2022 Share Posted January 18, 2022 @krlenjushka. Thanks for the reply. I've found a solution. I have deleted all the sub folders in the editor 22 folder. That makes the editor revert to its original format. 1 Link to post Share on other sites More sharing options...
vassilispyrgos Posted April 6, 2022 Share Posted April 6, 2022 (edited) hello guys i want to change subs in the UEFA Euro qualifications but i cant find it because it does not have stages what should i do?? if @Wolf_pd can help me i would be grateful Edited April 6, 2022 by vassilispyrgos Tag Link to post Share on other sites More sharing options...
Wolf_pd Posted April 6, 2022 Share Posted April 6, 2022 Check the League settings, that should have the sub rules. Link to post Share on other sites More sharing options...
vassilispyrgos Posted April 6, 2022 Share Posted April 6, 2022 20 minutes ago, Wolf_pd said: Check the League settings, that should have the sub rules. unfortunately Wolf it does not have Link to post Share on other sites More sharing options...
vassilispyrgos Posted April 6, 2022 Share Posted April 6, 2022 so what should i do? Link to post Share on other sites More sharing options...
rusty217 Posted April 7, 2022 Share Posted April 7, 2022 On 07/04/2022 at 02:15, vassilispyrgos said: hello guys i want to change subs in the UEFA Euro qualifications but i cant find it because it does not have stages what should i do?? if @Wolf_pd can help me i would be grateful A lot of international competitions don't extract to advanced rules correctly. The Euro qualifiers are one of those. You'll have to recreate the stages if you want to change the sub rules. Have a look around though, somebody else may have already recreated that competition. I re-created them for my 40 team world cup file (https://community.sigames.com/forums/topic/563875-fm224-40-team-world-cup/). You could grab them from that file using the copy/paste method I mentioned above (https://community.sigames.com/forums/topic/540347-how-to-extract-continental-club-and-international-files-from-editor-tutorial/?do=findComment&comment=13403624) so that you don't have any of the other changes. I'm not 100% sure but I think in that file the only changes I made were host selection for the European Championships themselves (which would be overriden by the default settings if the file mode is set to Flexible Format Rules) and I changed the qualifiers to accomodate anywhere from 50 to 60 teams (rather than the hardcoded 54/55 default setting). Link to post Share on other sites More sharing options...
vassilispyrgos Posted April 7, 2022 Share Posted April 7, 2022 (edited) 3 hours ago, rusty217 said: A lot of international competitions don't extract to advanced rules correctly. The Euro qualifiers are one of those. You'll have to recreate the stages if you want to change the sub rules. Have a look around though, somebody else may have already recreated that competition. I re-created them for my 40 team world cup file (https://community.sigames.com/forums/topic/563875-fm224-40-team-world-cup/). You could grab them from that file using the copy/paste method I mentioned above (https://community.sigames.com/forums/topic/540347-how-to-extract-continental-club-and-international-files-from-editor-tutorial/?do=findComment&comment=13403624) so that you don't have any of the other changes. I'm not 100% sure but I think in that file the only changes I made were host selection for the European Championships themselves (which would be overriden by the default settings if the file mode is set to Flexible Format Rules) and I changed the qualifiers to accomodate anywhere from 50 to 60 teams (rather than the hardcoded 54/55 default setting). i will take a look Edited April 7, 2022 by vassilispyrgos Link to post Share on other sites More sharing options...
rbirdy17 Posted October 3, 2022 Share Posted October 3, 2022 Are you able to extract a competition from say FM21 and put it into FM19? Like the Europa Conference League extracted from FM21 and put into FM19? Link to post Share on other sites More sharing options...
Degzy Posted October 20, 2022 Share Posted October 20, 2022 On 29/11/2020 at 09:12, krlenjushka said: Many people ask how to extract files such as UEFA Nations League, EC qualifying, Copa America.... This is tutorial how you can do it. Set some nation to competition you want to extract. In this case ECQ - country is Serbia. After that add nation rules ---> choose Serbia and select "Add lower divisions and cups". You will get Basic Rules screen - you need to convert to advanced rules. When converted - you will get ECQ file at serbian nation rules list. Go to the "list" section and mark all files except ECQ Click remove and you will have only ECQ file in your advanced list. Now we must delete that 1 database change we created - we added nation to ECQ. Go to Database Changes section, mark that one record and click remove. After that click "reload ratabase and apply undeleted changes" Now we have ECQ file in our advanced list without any database changes. Only thing left is to get rid of Nation Rules. For this we must edit xml file. First we need to save this file as xml. Go to File---Export and export your file as xml file. Choose name of your file and save it at some location where you can find it I saved my file as ECQ.xml Its located on display in my case. You need to open and edit this file manualy. Notepad ++ is good option for that. When you open your file you will get something like this Click somewhere at line 3 - "rule_group" line. Its start of Basic editor nation rules section. When you click somewhere on that line you will see red line Scroll down with your mouse and you will see where that section (red line) ends. In this case its line 289. We need to mark everything between line 3 and 289 (including those lines) and to delete it When you mark this just click backspace button at your keyboard and you will delete those lines (basic text editing -has nothing to do with FM). You will get something like this: Delete that empty line again with backspace button. Go to File---> Save and save your file. Thats it. Now you have extracted ECQ file without anything else. You can load(import) it to editor if you wanna change something. I have a question, i know you've answered this differently when you continue this tutorial... at the stage where you've removed the database changes and now have to delete the nation rules.. is possible to add a new nation to the teams registered list before deleting stuff in notepad? i've basically taken pre-ireland and created a new nation and want to add the new nation to the nations league. the headache that i've got is the copy and paste job at the end of your tutorial. i've done so much detailed work to my nations database and the only thing missing is that nation playing in the nations league. so you can see why i'm fishing for a quicker fix haha Link to post Share on other sites More sharing options...
M00rz3d Posted January 2, 2023 Share Posted January 2, 2023 (edited) On 28/12/2021 at 01:31, rusty217 said: I'll give it a go Set a nation for the competition you want to extract. In this case European Champions Cup is set to Serbia. After that add nation rules ---> choose Serbia and select "Add lower divisions and cups". You will get Basic Rules screen - you need to convert to advanced rules. After converting click the "Show Rules For" drop down box and choose your competition, in this case the European Champions Cup. Click on the competition. Then select "Edit" > "Copy". Now re-load the database. Select "No" when asked if you want to load unsaved changes. Add Club Continental (or International, in which case you can skip to converting to advanced rules) rules. Add 2 nations to the Qualification System (any nations will do as long as they're the right continent). Now convert to advanced rules. Once in advanced rules untick the "Enabled" box on the nations screen. Go to the List screen, click the "Add" button and then select your new "Other" rules from the "Show Rules For" drop down box. Click on the "Rules" section and then choose "Paste" from the Edit menu. Now you have your continental club or international competition loaded in advanced rules. Finally, don't forget to add the competition under Continent/International > Competitions Your final picture. Are you saying I should re-enable and add the two nations back? Or I can just edit my competition advanced rules now without doing that? Also, with this, does this mean I would require at least 2 data files to make my newly moved African country in the Europe to work? Or is there a way to import the now advanced rules of this competition into my original data file? I am also editing multiple competitions. Is there a way to combine them all or do I have to keep separate data files for each? Edit: I just merged both databases and I've come to the conclusion I can do that for my other files. This was after saving the rule changes as its own file, of course. I still need to know if I have to reenable the nations that supply the teams. Edited January 2, 2023 by M00rz3d Rhema Link to post Share on other sites More sharing options...
rusty217 Posted January 2, 2023 Share Posted January 2, 2023 1 hour ago, M00rz3d said: Your final picture. Are you saying I should re-enable and add the two nations back? Or I can just edit my competition advanced rules now without doing that? Also, with this, does this mean I would require at least 2 data files to make my newly moved African country in the Europe to work? Or is there a way to import the now advanced rules of this competition into my original data file? I am also editing multiple competitions. Is there a way to combine them all or do I have to keep separate data files for each? Edit: I just merged both databases and I've come to the conclusion I can do that for my other files. This was after saving the rule changes as its own file, of course. I still need to know if I have to reenable the nations that supply the teams. I think that was just a copy/paste error. Definitely don't enable any nations there, doing so will remove them from the default club continental competitions, eg. UCL etc. For multiple competitions, merging is one option. Or just copy/paste them over. The above method puts the rules into a new file. If you already have an existing file, then after copying the rules you want re-load the database, load your editor file, add a new blank rules set, click onto the main page of it and then paste. That should copy over the international rules. Save your file again, then go back for the next set of rules you want to copy/paste over. Link to post Share on other sites More sharing options...
M00rz3d Posted January 2, 2023 Share Posted January 2, 2023 38 minutes ago, rusty217 said: I think that was just a copy/paste error. Definitely don't enable any nations there, doing so will remove them from the default club continental competitions, eg. UCL etc. For multiple competitions, merging is one option. Or just copy/paste them over. The above method puts the rules into a new file. If you already have an existing file, then after copying the rules you want re-load the database, load your editor file, add a new blank rules set, click onto the main page of it and then paste. That should copy over the international rules. Save your file again, then go back for the next set of rules you want to copy/paste over. Thank you, Rusty. I came across some minor issues when merging even so I undid that. It'll be best to follow your instructions. Link to post Share on other sites More sharing options...
M00rz3d Posted January 2, 2023 Share Posted January 2, 2023 4 hours ago, rusty217 said: Quote For multiple competitions, merging is one option. Or just copy/paste them over. The above method puts the rules into a new file. If you already have an existing file, then after copying the rules you want re-load the database, load your editor file, add a new blank rules set, click onto the main page of it and then paste. That should copy over the international rules. Save your file again, then go back for the next set of rules you want to copy/paste over. Hey Rusty. Well, I tried following your instructions to adding a new blank rule after I copied the original international league rule. But after I load database and then my original data file, when I create a new rule on the list in advanced rules, it doesn't let me paste what I copied. The option is not enabled. When I use a blank file and do your exact steps, I see the option to paste, just not when I use my editor file. What do you think could be the issue? Quote Link to post Share on other sites More sharing options...
rusty217 Posted January 3, 2023 Share Posted January 3, 2023 4 hours ago, M00rz3d said: Hey Rusty. Well, I tried following your instructions to adding a new blank rule after I copied the original international league rule. But after I load database and then my original data file, when I create a new rule on the list in advanced rules, it doesn't let me paste what I copied. The option is not enabled. When I use a blank file and do your exact steps, I see the option to paste, just not when I use my editor file. What do you think could be the issue? Maybe too much time between copying/pasting? I don't know, it's always worked for me. You're definitely on the right part of the rules file to paste to? When re-loading the database you just click File > Load Database, then after Load Editor Data? You're not actually exiting and restarting the editor, right? Link to post Share on other sites More sharing options...
M00rz3d Posted January 3, 2023 Share Posted January 3, 2023 1 hour ago, rusty217 said: Maybe too much time between copying/pasting? I don't know, it's always worked for me. You're definitely on the right part of the rules file to paste to? When re-loading the database you just click File > Load Database, then after Load Editor Data? You're not actually exiting and restarting the editor, right? Maybe too much time. I didn't exit the editor and followed your instructions to a T. Once I loaded database and loaded my editor data, which is already in advanced rules, I go to the list, add a new rule, open the "show rules for" the new other rules but once I'm over the rule, there's no option to paste. It's a bit irking. Link to post Share on other sites More sharing options...
mi.fritsch90 Posted April 5, 2023 Share Posted April 5, 2023 Am 3.1.2023 um 03:22 schrieb M00rz3d: Maybe too much time. I didn't exit the editor and followed your instructions to a T. Once I loaded database and loaded my editor data, which is already in advanced rules, I go to the list, add a new rule, open the "show rules for" the new other rules but once I'm over the rule, there's no option to paste. It's a bit irking. I have the same issue and the time between copy and paste is not the problem, I was very fast and tried it several times ;-) But the xml way still works, so I can edit the CAF Champions League and correct all the wrong data Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now