tariq13 Posted November 16, 2018 Share Posted November 16, 2018 I'm running into an error I've never seen before. I've created the second division in the United States. The structure is as follows: stage 0 is a group stage with 2 groups and top eight teams from each group move on to a playoff round. Stage 1 is the playoff round for one group, Stage 2 is the playoff round for the other group. I have stage 0 working properly but now I'm getting an error that says "The number of dates set in stage 1 of the competition is 0 but should be equal to 30." I'm not sure why I'm getting this. Stage 1 is a cup with 8 teams. All the teams start in Round 0 (quarter final), then Round 1 (semifinal), and Round 2 (final). I don't have fixture dates set, I've set the dates myself. I don't know what it means by there are 0 dates, and I also don't understand what it means that there should be 30. Since I don't have fixture dates set, I have no idea where I would even begin to fix this error. USA test 2.fmf Link to post Share on other sites More sharing options...
krlenjushka Posted November 16, 2018 Share Posted November 16, 2018 Have you tried to test in game? Link to post Share on other sites More sharing options...
tariq13 Posted November 17, 2018 Author Share Posted November 17, 2018 Yeah. I run a test through November and the playoff rounds never begin. Stage 1 and 2 are never created. The playoff rounds start October 21st. Nothing gets scheduled after Stage 0 ends. Link to post Share on other sites More sharing options...
tariq13 Posted November 17, 2018 Author Share Posted November 17, 2018 (edited) Something interesting I've discovered about this issue. Under "Requirements" for Stage 1 and 2, I have it set to wait until Stage 0 finishes. If I don't have "Check for Early Finish" checked, it gives the error above. If I do have "Check for Early Finish". checked, it gives the error that no teams were found in Stage 1. In Stage 0, for Groups 1 and 2, I have "Process Early Finish" checked. Edited November 17, 2018 by tariq13 Link to post Share on other sites More sharing options...
Jazperdeman Posted December 27, 2018 Share Posted December 27, 2018 I have a very similar problem. I'm making some new rules for my version of the Dutch pyramid. Nothing to difficult. However when testing the second tier competition it gives me this error: This is very weird, because it is a league with 18 teams and I have it set to 34 dates (and not 13 or 30!): So when I set it to 30 (as per the error-message), I get the error that it should be equal to 34 (as I had before and it should be): Can someone explain what is going on here? Link to post Share on other sites More sharing options...
DrVanNostrand Posted January 12, 2019 Share Posted January 12, 2019 I'm having the exact same problem when trying to set up reserve leagues - dates set in stage is 0 but should be 30. No idea why... Link to post Share on other sites More sharing options...
Kanwulf Posted March 2, 2019 Share Posted March 2, 2019 Anyone managed to figure this one out yet? Link to post Share on other sites More sharing options...
yaushosze Posted March 24, 2019 Share Posted March 24, 2019 I have the same problem... "The number of dates set in stage 0 is 2 but should be equal to 18." Link to post Share on other sites More sharing options...
gibbo11 Posted April 16, 2019 Share Posted April 16, 2019 (edited) I have this issue too. Don't suppose anyone has found a fix/way around it at all? edit: I've found how to fix this. Double check all your dates that you have added for start and ends are within a correct range i.e. if you want your season to run August 2018 to May 2019, ensure the Stage dates in General are set to July 2018 to June 2019, as an example Edited April 16, 2019 by gibbo11 Link to post Share on other sites More sharing options...
alian62 Posted April 18, 2019 Share Posted April 18, 2019 Individual leagues you had both at Zero ? You need one individual league at zero and the next at 1 …. Just like stages !! This has worked but you now have another error referring to stage 2 not having any teams Link to post Share on other sites More sharing options...
alian62 Posted April 19, 2019 Share Posted April 19, 2019 On 17/11/2018 at 06:30, tariq13 said: I'm running into an error I've never seen before. I've created the second division in the United States. The structure is as follows: stage 0 is a group stage with 2 groups and top eight teams from each group move on to a playoff round. Stage 1 is the playoff round for one group, Stage 2 is the playoff round for the other group. I have stage 0 working properly but now I'm getting an error that says "The number of dates set in stage 1 of the competition is 0 but should be equal to 30." I'm not sure why I'm getting this. Stage 1 is a cup with 8 teams. All the teams start in Round 0 (quarter final), then Round 1 (semifinal), and Round 2 (final). I don't have fixture dates set, I've set the dates myself. I don't know what it means by there are 0 dates, and I also don't understand what it means that there should be 30. Since I don't have fixture dates set, I have no idea where I would even begin to fix this error. USA test 2.fmf Link to post Share on other sites More sharing options...
alian62 Posted April 20, 2019 Share Posted April 20, 2019 On 17/11/2018 at 06:30, tariq13 said: I'm running into an error I've never seen before. I've created the second division in the United States. The structure is as follows: stage 0 is a group stage with 2 groups and top eight teams from each group move on to a playoff round. Stage 1 is the playoff round for one group, Stage 2 is the playoff round for the other group. I have stage 0 working properly but now I'm getting an error that says "The number of dates set in stage 1 of the competition is 0 but should be equal to 30." I'm not sure why I'm getting this. Stage 1 is a cup with 8 teams. All the teams start in Round 0 (quarter final), then Round 1 (semifinal), and Round 2 (final). I don't have fixture dates set, I've set the dates myself. I don't know what it means by there are 0 dates, and I also don't understand what it means that there should be 30. Since I don't have fixture dates set, I have no idea where I would even begin to fix this error. USA test 2.fmf So? Link to post Share on other sites More sharing options...
Suggy33 Posted November 19, 2019 Share Posted November 19, 2019 Major bump but I have encountered this error last night. During testing, it sims the first season fine and then I get a mismatched number of dates (22 dates when there should be 26). I can’t change them because it would mess up my first season, however my number of teams in the league is fluid (it’s the 5 regional Russian 2nd divisions) and therefore I want to actually not use dates, but it forces me to. I think my ideal solution would be: how can I make my rules work without having a date for every matchday? The RPL only has 6 compulsory dates in a 30 matchday season and works fine, so in theory I should be able to have the same in these divisions, but it forces me to create dates for every matchday, which then can go wrong after 1 season if the number of teams changes. Link to post Share on other sites More sharing options...
TH3 K1LL3R Posted January 15, 2020 Share Posted January 15, 2020 Em 19/11/2019 em 09:57, Suggy33 disse: Major bump but I have encountered this error last night. During testing, it sims the first season fine and then I get a mismatched number of dates (22 dates when there should be 26). I can’t change them because it would mess up my first season, however my number of teams in the league is fluid (it’s the 5 regional Russian 2nd divisions) and therefore I want to actually not use dates, but it forces me to. I think my ideal solution would be: how can I make my rules work without having a date for every matchday? The RPL only has 6 compulsory dates in a 30 matchday season and works fine, so in theory I should be able to have the same in these divisions, but it forces me to create dates for every matchday, which then can go wrong after 1 season if the number of teams changes. Did anyone found how to fix this is error? I'm getting same error on my portuguese lower leagues Link to post Share on other sites More sharing options...
veeeeh Posted November 23, 2020 Share Posted November 23, 2020 Still no one figured out how to solve this error? Link to post Share on other sites More sharing options...
Wolf_pd Posted November 24, 2020 Share Posted November 24, 2020 On 16/04/2019 at 20:19, gibbo11 said: I have this issue too. Don't suppose anyone has found a fix/way around it at all? edit: I've found how to fix this. Double check all your dates that you have added for start and ends are within a correct range i.e. if you want your season to run August 2018 to May 2019, ensure the Stage dates in General are set to July 2018 to June 2019, as an example 11 hours ago, veeeeh said: Still no one figured out how to solve this error? See the remark by Gibbo. Link to post Share on other sites More sharing options...
veeeeh Posted December 13, 2020 Share Posted December 13, 2020 On 24/11/2020 at 04:58, Wolf_pd said: See the remark by Gibbo. Thanks for your reply. I've checked my file, and I have now included dates for all the competitions in my system, but when testing the rules, it keep saying that "the number of dates set in stage 0 of the competition is 1 but should be equal to 27" when there is no league with number of dates set in zero. It's frustrating because I have worked a lot in the file... do you know what else could be? Thanks! Link to post Share on other sites More sharing options...
Robbles Quin ®™ Posted December 13, 2020 Share Posted December 13, 2020 i had this with my Japan file. this was solved for me by creating custom fixture dates and adding them to the dates list. if a league has a dynamic number of teams then it is more difficult. Link to post Share on other sites More sharing options...
veeeeh Posted December 13, 2020 Share Posted December 13, 2020 10 hours ago, Robbles Quin ®™ said: i had this with my Japan file. this was solved for me by creating custom fixture dates and adding them to the dates list. if a league has a dynamic number of teams then it is more difficult. Thanks. Do you have your file for me to take a look at it, to see how you did it and where? By dynamic number of teams do you mean when you complete the minimum and maximum amount of teams with different numbers from the actual league configuration? Link to post Share on other sites More sharing options...
Robbles Quin ®™ Posted December 13, 2020 Share Posted December 13, 2020 5 hours ago, veeeeh said: Thanks. Do you have your file for me to take a look at it, to see how you did it and where? By dynamic number of teams do you mean when you complete the minimum and maximum amount of teams with different numbers from the actual league configuration? dynamic meaning. lets say 2020 has 18 teams, that means 34 matches for each team and that means you need 34 dates. but in 2021 if you then had 20 teams you need 38 dates. so youd have to duplicate the league and add in the extra dates. this is the harder way. if you dont mind not having 100% realistic fixtures then you just select a start and end date from the schedules tab and add in match days to lets say saturday and sunday. Link to post Share on other sites More sharing options...
veeeeh Posted December 17, 2020 Share Posted December 17, 2020 On 13/12/2020 at 20:01, Robbles Quin ®™ said: dynamic meaning. lets say 2020 has 18 teams, that means 34 matches for each team and that means you need 34 dates. but in 2021 if you then had 20 teams you need 38 dates. so youd have to duplicate the league and add in the extra dates. this is the harder way. if you dont mind not having 100% realistic fixtures then you just select a start and end date from the schedules tab and add in match days to lets say saturday and sunday. Thanks. I have several competitions in my system that have, for example, 24 or 26 teams ... Do you think that if I modify them to have 20, the error could disappear? Link to post Share on other sites More sharing options...
Robbles Quin ®™ Posted December 18, 2020 Share Posted December 18, 2020 HAVE YOU TRIED THIS? Link to post Share on other sites More sharing options...
veeeeh Posted December 19, 2020 Share Posted December 19, 2020 21 hours ago, Robbles Quin ®™ said: HAVE YOU TRIED THIS? Yes, of course. Every league has this screen completed, even those with two or more stages, or playoffs. But thanks for your suggestion! Link to post Share on other sites More sharing options...
Robbles Quin ®™ Posted December 19, 2020 Share Posted December 19, 2020 send me your file ill have a look Link to post Share on other sites More sharing options...
veeeeh Posted January 31, 2021 Share Posted January 31, 2021 On 19/12/2020 at 03:52, Robbles Quin ®™ said: send me your file ill have a look Thank you very much for your offer. I was on a vacation and then forgot to reply here, but my problem is solved. I did what I told you in my last message: changed divisions which were so big in teams to versions with 22 teams as a maximum, and that solved the issue. Link to post Share on other sites More sharing options...
Edinson Fathoni Posted February 5, 2023 Share Posted February 5, 2023 I have the same problem too with my project league, overhaul my country league. I already try to untick the number of dates, and set the start month one month earlier, and end month one month later, and still get the same error. I even don't know where these number is coming from Waiting advice from here first, before attempting to split the league one tier more to make the match dates of the upper league lesser too Indonesian League Level 5 Fantasy (Verified).fmf Link to post Share on other sites More sharing options...
alonsky47 Posted April 25, 2023 Share Posted April 25, 2023 Hi! Unfortunately, I have a similar problem. However, I did not create a league from scratch, I took the Serbian Super League as a basis by simply adding the number of teams. They have an interesting league - they have first round and then division into two groups in second round. When test rules, for some reason, editor wants to see 11 dates (well, he sees only 0) in Stage 0! In Stage 0, it should search exclusively for 23 dates - but he for some reason is searching 11 dates... Adding 11 dates does not help (as does replacing 23 with 11, in the end he asks for 23dates). I spent a lot of time on this file, I would not like to lose it, so I ask for help YugoslaviaMod0.6.fmf Link to post Share on other sites More sharing options...
themodelcitizen Posted October 5, 2023 Share Posted October 5, 2023 For what it's worth. This has bugged me a few times but seems to arise in ANOTHER stage than mentioned, and as best I can tell is usually a result of an issue with groups... i.e., having multiple "individual group rules" sharing the same group index (0 and 0 instead of 0 and 1, say), or having too many or too few "number of groups" set under "group settings", which can arise if you're messing with a format but forget to make all the necessary changes Link to post Share on other sites More sharing options...
Patchanka666 Posted January 10 Share Posted January 10 I had the same problem and managed to solve it. Like @themodelcitizen mentioned above, it had to do something with the groups I created. These groups were used to split the regular competition in 3 periods where the winner of each period is assigned a playoff spot. The periods are based on matchdays (1-10, 11-20,21-30) in the regular season for which the results are used in the groups. The issue was that i had forgotten to unthick below box. Otherwise additional fixtures on top of the regular matchdays were created and the error was shown. 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now