CurnRaisin Posted March 14, 2023 Share Posted March 14, 2023 16 minutes ago, MRC said: I don't know unfortunately, but this should be quite easy to test provided you have the ingame Editor. Alas I do not have the ingame editor to test this myself. Planing to start playing on the game pass version see if I like FM23 or not, if I do I'd then be buying it on steam probably so don't want to go spending money on the ingame editor for a version I'll not be using that long. 5 hours ago, Guilha said: I put exactly the same CA as the recommended (104) for the sake of the screenshot (with PA 156, just as test). - I don't know if this matters, but player is 14yo. What confuses me the most is attributes, in general, seem ok to me, and most are what they should be or near so, so CA/CP should be fine, but then there are some examples like Dribbling/Passing (that I showed) or Aggression/Pace where 1 attribute in Editor is higher/lower than the other, but then in-game they're the other way around without apparent reason. I understand the Editor in general, but this thing I really don't get. Well there goes my theory, I've created a pile of players for my save, Talking close to 100 at this stage but never noticed anything drastic like this. Sure a few ones can be out by 1-2 points but never a jump like you seen. In positions what is the role used to fill in attributes set too? Could it be his age? Try making them older 17/18 and see if the same thing happens. Link to post Share on other sites More sharing options...
Guilha Posted March 14, 2023 Share Posted March 14, 2023 16 minutes ago, CurnRaisin said: Well there goes my theory, I've created a pile of players for my save, Talking close to 100 at this stage but never noticed anything drastic like this. Sure a few ones can be out by 1-2 points but never a jump like you seen. In positions what is the role used to fill in attributes set too? Could it be his age? Try making them older 17/18 and see if the same thing happens. i can't be assed right now, but I will for ure look into this again, tweaking his age or position, maybe that's the issue, which - in my opinion - still wouldn't make any sense, but... Anyway, thank you for trying to help anyways. Link to post Share on other sites More sharing options...
bielsadidnothingwrong Posted March 15, 2023 Share Posted March 15, 2023 6 hours ago, MRC said: Bring up the competition -> Teams -> add, add the team that you want from the Eastern Conference into the Western, make sure to fill the Eastern up. I tried switching FC Tulsa and Oakland, went to Nation Rules to test and it verified without problems. Can't test it ingame right now, but perhaps you can. Which competition? MLS EC and WC are empty, and MLS clubs as a whole aren't separated into conferences. Link to post Share on other sites More sharing options...
MRC Posted March 15, 2023 Share Posted March 15, 2023 (edited) vor 8 Stunden schrieb bielsadidnothingwrong: Which competition? MLS EC and WC are empty, and MLS clubs as a whole aren't separated into conferences. My bad, I pulled up the USSL Conferences. Not too well versed with the US system, although I've heard it can be a pain to edit. But I'll try for the MLS: Go to Nation Rules -> add lower leagues to existing structures -> USA; then pull up the MLS This is without me testing but it might be worth a try. I believe the Teams are separated by info set in Teams -> Registered Teams. So you can go in there, put one team from 0 to 1, the other from 1 to 0 (I would just recommend swapping teams in a setup like this, at least to see if it works), then save, verify, save again and see if it works ingame. Edited March 15, 2023 by MRC Link to post Share on other sites More sharing options...
FinbarEvans Posted March 15, 2023 Share Posted March 15, 2023 Hi all, Does anyone know where I can find editor settings for news/social media posts for a custom league/nation I have made? Link to post Share on other sites More sharing options...
mt90 Posted March 16, 2023 Share Posted March 16, 2023 Hello! I still play FM 21. Where can I edit in pre game editor the CL, EL, UECL fixture dates? Because I don't want to play the group stages from october (I think reason is COVID.) If I send my file in pm, someone can help me? Thanks! Link to post Share on other sites More sharing options...
Joe Horn Posted March 16, 2023 Share Posted March 16, 2023 Hi all, How would I go about making it so a country I have added to the game play in European Championship qualifiers/World Cup Qualifiers etc as currently as far as I've simulated (3yrs) they don't seem to be Thank you in advance Joe Link to post Share on other sites More sharing options...
mt90 Posted March 20, 2023 Share Posted March 20, 2023 Hello! Another problem/question: Since last saturday my FM 21 pre-game is editor is very low. Database changes are 40k+. Is there the problem? Link to post Share on other sites More sharing options...
bigbeezer Posted March 20, 2023 Share Posted March 20, 2023 Hi folks, Im kinda new to FM and would like to start using the editor to mess around, is it ok to ask a few questions? If i load the FM23 data and then edit it, is it possible to save that DB and then have it availiable to re load and edit again? i tried it but must habve mucked it up as i lost changes and it was back to the fm23 data? also, are there any good tutorials on YT ect that would help me? thank you Link to post Share on other sites More sharing options...
Samuel77 Posted March 20, 2023 Share Posted March 20, 2023 Il y a 5 heures, bigbeezer a dit : i load the FM23 data and then edit it, is it possible to save that DB and then have it availiable to re load and edit again? i tried it but must habve mucked it up as i lost changes and it was back to the fm23 data? Yes, this is possible. You save the backup you have edited, e.g. Edit01, and then reload it when you need to edit it again. For YT I never look, I guess there must be some good Tuto but I don't know. 1 Link to post Share on other sites More sharing options...
krakonico Posted March 21, 2023 Share Posted March 21, 2023 On 16/03/2023 at 16:25, Joe Horn said: Hi all, How would I go about making it so a country I have added to the game play in European Championship qualifiers/World Cup Qualifiers etc as currently as far as I've simulated (3yrs) they don't seem to be Thank you in advance Joe If you activated an extinct country like "Ireland pre-1922" etc, and "move" one country to Asia (i.e. Kazakhstan), you won't have troubles, maybe just the first season, but after that your new country will play all qualifications, and the clubs will play in all European leagues. I had a save that currently has three European countries (with it's perks) Link to post Share on other sites More sharing options...
bigbeezer Posted March 21, 2023 Share Posted March 21, 2023 So i open editor, Load the 23.30 update, then i edit players, How do i save this? and How do i then Upload it to edit it again the next time? Thanks Link to post Share on other sites More sharing options...
bigbeezer Posted March 21, 2023 Share Posted March 21, 2023 I can see "merge editor data" or "save editor data as" I would like to keep this DB seperate from the main FM 23 DB if poss. Link to post Share on other sites More sharing options...
RussoTuristo Posted March 21, 2023 Share Posted March 21, 2023 Good evening all I want to transfer my FM22 Lyon squad to FM23 (so basically recreate newgens by myself won't be hard, just take a bit of time) but in EPL - so I created a new team (don't want to rename old ones) How do I put my U21 and U18 teams in their divisions? I've tried to set a divisions but it seems it doesn't work the way I want. Link to post Share on other sites More sharing options...
rusty217 Posted March 22, 2023 Share Posted March 22, 2023 18 hours ago, bigbeezer said: I can see "merge editor data" or "save editor data as" I would like to keep this DB seperate from the main FM 23 DB if poss. Save editor data as, then just give it a name. When you start a new save there should be an option for which editor files you want to load, just make sure it's ticked there and it'll be in your game. All editor files are separate from the main database, it's not possible to overwrite it. 1 Link to post Share on other sites More sharing options...
Gladia239311 Posted March 23, 2023 Share Posted March 23, 2023 Hi, For several days I have been trying to make an update with the "real life results". I'm creating the results of all the championships so that we can start in March or in the summer of 2023 with the real results of 2022-2023. Unfortunately, I don't know how to put the cup results. For example, how can we get the real result of the League Cup between Manchester United and Newcastle? In the same idea, I can't get the real World Cup or Champions League calendar. I have the impression that for the cups, you can't really do what you want, whereas for the leagues it's very easy (even if it's very long) to put the real calendar with the real results. Can I get some help? Any advice? Some screenshots? Thank you very much Link to post Share on other sites More sharing options...
kurovski Posted March 24, 2023 Share Posted March 24, 2023 I need a little help. I'm editing a division that includes teams from another nation. In other to do that, I need to change all the temas from that nation. But somehow, although everything works fine in the pre-game editor, when I try to start a new carrer, the game seems to keep the basic nations rules over my changes. So, my try to workaround this is to find this basic rules and erase those. So, my question is, where do I find these rules and delete them? Link to post Share on other sites More sharing options...
bigbeezer Posted March 24, 2023 Share Posted March 24, 2023 On 22/03/2023 at 09:55, rusty217 said: Save editor data as, then just give it a name. When you start a new save there should be an option for which editor files you want to load, just make sure it's ticked there and it'll be in your game. All editor files are separate from the main database, it's not possible to overwrite it. Thanks ,mate, appreciate it. Link to post Share on other sites More sharing options...
bigbeezer Posted March 24, 2023 Share Posted March 24, 2023 Are there any guidlines for CA, CA/PA ranges per league? Ie - what ca range is a good epl player, a top epl player etc la liga... Ligue 1.... Serie A Bundasliga..... Thanks Link to post Share on other sites More sharing options...
bigbeezer Posted March 26, 2023 Share Posted March 26, 2023 Hello, is there a way of sorting players 1 - to be based in a country and 2 - to sort them by CA either ascending or descending With the CA being visible as you scroll up down the player list? thank you Link to post Share on other sites More sharing options...
CRN711 Posted March 26, 2023 Share Posted March 26, 2023 Hi everyone, Do you know if there is a way to put a "transfer rule" to force a club to only buy players from a specific country ? A bit like the Athletic Bilbao and basque players rule Link to post Share on other sites More sharing options...
Samuel77 Posted March 27, 2023 Share Posted March 27, 2023 Il y a 6 heures, CRN711 a dit : Hi everyone, Do you know if there is a way to put a "transfer rule" to force a club to only buy players from a specific country ? A bit like the Athletic Bilbao and basque players rule No, but I think you can force a club to have no foreigners. From then on I imagine that the club in question will not recruit any foreigners. It is also possible to force clubs based in country A playing in country B to recruit only players from country A. This is in squad registration. Link to post Share on other sites More sharing options...
bigbeezer Posted March 28, 2023 Share Posted March 28, 2023 Hi, what is it that dictates if a player is selected by the AI? is it his CA? or CR? Also, is there any correlation between club rep and the rep of a player they will or wont sign? Say if his CR is low will they still sign him? cheers Link to post Share on other sites More sharing options...
bigbeezer Posted March 28, 2023 Share Posted March 28, 2023 Hi, is there anybody with extensive knowledge of the editor i can have a chat with? i have been editing but want to make sure i am doing it right regarding all the different atts for players/managers and what affect they have on CA etc, etc. Lots of questions and would really appreciate a wee bit advice. thank you Link to post Share on other sites More sharing options...
Motobaka Posted March 28, 2023 Share Posted March 28, 2023 Hello There, I’m doing a Global league based in Liechtenstein and would like for the teams involved not to participate on continental competitions. Better yet, is there an easy way to remove all continental competitions? Link to post Share on other sites More sharing options...
bigbeezer Posted March 29, 2023 Share Posted March 29, 2023 Hi, What are all the CA manager attributes? cheers Link to post Share on other sites More sharing options...
rristola Posted April 1, 2023 Share Posted April 1, 2023 First, I'm not familiar with the Editor, but I'm in a "team" making a lower leagues pack. So, when you explain me something in Editor, use "easy" language... Problem: when years pass, those teams which promote/relegate CAN start 'moving' their location. Or, a team from south can end up playing in north aso. How can this be avoided? Or is this country based problem - there just should be more local area levels (to the lowest division), but there isn't in every country? Any way to add these? There are Mods like England lower leagues working OK, so this has to be possible. Thanks. Link to post Share on other sites More sharing options...
bigbeezer Posted April 2, 2023 Share Posted April 2, 2023 Hello, when making changes in the editor to a players attributes, you get a suggested CA from the editor. What happens if you dont put the suggested CA in? Does the player revert back to his old CA and old ATTS? THANKS Link to post Share on other sites More sharing options...
hrmantovani Posted April 3, 2023 Share Posted April 3, 2023 How can I change this in the editor? I'm trying to take on a 2-manager San Marino challenge (Italy and San Marino leagues) and I want to bring the best Sammarinese prospects to Italy before they turn 18. Link to post Share on other sites More sharing options...
rusty217 Posted April 3, 2023 Share Posted April 3, 2023 3 hours ago, hrmantovani said: How can I change this in the editor? I'm trying to take on a 2-manager San Marino challenge (Italy and San Marino leagues) and I want to bring the best Sammarinese prospects to Italy before they turn 18. Adding San Marino to the EU should reduce the age limit to 16. 1 Link to post Share on other sites More sharing options...
mi.fritsch90 Posted April 4, 2023 Share Posted April 4, 2023 What is the recommended way to edit advanced rules of international competitions like the CAF Champions League? I found some old manuals where they have added this competition to a nation to make it visible in advanced rules for this nation. But I also found some files where this was implemented in a different way, see screenshot attached. I just need to know how to navigate to this view to edit this competition. Thanks in advance! Link to post Share on other sites More sharing options...
Novem9 Posted April 4, 2023 Share Posted April 4, 2023 (edited) Remind me please where I can change a newgens adaptability for specific country (nation)? Thanks! Edited April 4, 2023 by Novem9 Link to post Share on other sites More sharing options...
rusty217 Posted April 5, 2023 Share Posted April 5, 2023 11 hours ago, mi.fritsch90 said: What is the recommended way to edit advanced rules of international competitions like the CAF Champions League? I found some old manuals where they have added this competition to a nation to make it visible in advanced rules for this nation. But I also found some files where this was implemented in a different way, see screenshot attached. I just need to know how to navigate to this view to edit this competition. Thanks in advance! IMO this is the best way: The important part is that while you need to open nation rules to get access to the rules, the file needs to be setup as a continental rules file in order to work. Also note that while you can edit the tournament itself, you can't edit the qualifying system. Last I checked it wasn't possible to edit the European or Asian competitions without causing issues either. Africa, North America and South America can all be edited fine though. Link to post Share on other sites More sharing options...
bigbeezer Posted April 5, 2023 Share Posted April 5, 2023 Hi, i have been editing players in the pre game editor, i have done quite a lot of work. There is an option to merge? Can i merge my work with the latest update? I have only changed attributes, not moved players to different clubs. thanks Link to post Share on other sites More sharing options...
AhmedUK1 Posted April 5, 2023 Share Posted April 5, 2023 Hi Any idea if/how I can give a league more European places? I used to be able to do it with coefficients in the details page of the competition but I cant find it now Link to post Share on other sites More sharing options...
rusty217 Posted April 5, 2023 Share Posted April 5, 2023 4 hours ago, bigbeezer said: Hi, i have been editing players in the pre game editor, i have done quite a lot of work. There is an option to merge? Can i merge my work with the latest update? I have only changed attributes, not moved players to different clubs. thanks Just load it up with the latest version of the game/editor downloaded and save it. That should be all you need to do. Merge is used to combine it with other editor files, so it's not something you'd need to work with an official update. Link to post Share on other sites More sharing options...
rusty217 Posted April 5, 2023 Share Posted April 5, 2023 4 hours ago, AhmedUK1 said: Hi Any idea if/how I can give a league more European places? I used to be able to do it with coefficients in the details page of the competition but I cant find it now The coefficients section is on the nations page. I believe it's always been there, not the competition page. Link to post Share on other sites More sharing options...
AhmedUK1 Posted April 6, 2023 Share Posted April 6, 2023 9 hours ago, rusty217 said: The coefficients section is on the nations page. I believe it's always been there, not the competition page. Thanks very much Link to post Share on other sites More sharing options...
Xehakoha Posted April 8, 2023 Share Posted April 8, 2023 Is it possible to give minus points for a defeat when setting the league point system? It's like the rule "The team that wins the match wins 3 points, the team that loses loses 3 points" It can be +1/-1 here, for example, the number doesn't matter. The feature of the system is that the losing team loses as many points as the winning team wins. I've noticed that the editor only allows for a minimum of 2 points for a win, 1 point for a draw, and 0 points for a loss. I'm wondering if there's any way to make my point system work within the FM universe or if it's just not possible. Link to post Share on other sites More sharing options...
ianvou Posted April 9, 2023 Share Posted April 9, 2023 Not exactly an editing question but here is my confusion. I am working on 2 different files. The one contains name changes of clubs, completion etch and the other one is only for competition and club colours. When I start a new game I can't see the colour changes I've made, for some reason game reads first the file that I didn't make colour changes. Is there a way I can "force" the game to show the color changes I've made? Link to post Share on other sites More sharing options...
krlenjushka Posted April 9, 2023 Share Posted April 9, 2023 53 minutes ago, vourtsio said: Not exactly an editing question but here is my confusion. I am working on 2 different files. The one contains name changes of clubs, completion etch and the other one is only for competition and club colours. When I start a new game I can't see the colour changes I've made, for some reason game reads first the file that I didn't make colour changes. Is there a way I can "force" the game to show the color changes I've made? Game will read all files in alphabetical order so you can change names. Link to post Share on other sites More sharing options...
Hibeesbounce Posted April 10, 2023 Share Posted April 10, 2023 I'm relatively experienced in using the editor, the resource archiver etc but this has stumped me. I want to add international rules but the editor is only allowing me to add random nations from a particular continent when I want to add specific teams. The "teams" section is greyed out. What do I have to change in the resource archiver to activate the ability to add specific teams to International Rules? Link to post Share on other sites More sharing options...
ianvou Posted April 10, 2023 Share Posted April 10, 2023 15 hours ago, krlenjushka said: Game will read all files in alphabetical order so you can change names. Just named colours as A.name.fmf abd the name changes as X.name.fmf but it didnt work!!! What's going on? I knew the game reads alphabetical but this time NOOOO! WTF Link to post Share on other sites More sharing options...
rusty217 Posted April 10, 2023 Share Posted April 10, 2023 2 hours ago, Hibeesbounce said: I'm relatively experienced in using the editor, the resource archiver etc but this has stumped me. I want to add international rules but the editor is only allowing me to add random nations from a particular continent when I want to add specific teams. The "teams" section is greyed out. What do I have to change in the resource archiver to activate the ability to add specific teams to International Rules? Don't suppose you can do it in advanced rules instead? It's a completely different screen there and lets you choose specific teams, as well as a bunch of other options. Link to post Share on other sites More sharing options...
rusty217 Posted April 10, 2023 Share Posted April 10, 2023 1 hour ago, vourtsio said: Just named colours as A.name.fmf abd the name changes as X.name.fmf but it didnt work!!! What's going on? I knew the game reads alphabetical but this time NOOOO! WTF It sounds like there's something wrong with your colours file. If both files are editing different things then they wouldn't even affect each other so load order shouldn't matter. Link to post Share on other sites More sharing options...
ianvou Posted April 10, 2023 Share Posted April 10, 2023 I loaded up a test save only picking colours and I can see the changes, if I load up both files then I can not see the changes....how can this happen???? Link to post Share on other sites More sharing options...
bigbeezer Posted April 10, 2023 Share Posted April 10, 2023 On 02/04/2023 at 08:30, bigbeezer said: Hello, when making changes in the editor to a players attributes, you get a suggested CA from the editor. What happens if you dont put the suggested CA in? Does the player revert back to his old CA and old ATTS? THANKS any ideas? thanks Link to post Share on other sites More sharing options...
ianvou Posted April 10, 2023 Share Posted April 10, 2023 2 hours ago, rusty217 said: It sounds like there's something wrong with your colours file. If both files are editing different things then they wouldn't even affect each other so load order shouldn't matter. So, when I started the History fix file I also edited the colors of all teams from Ligue 1 - National 2, after this the idea of the colour changes file was born. Now yesterday I thought to revert the colours in the History fix file as it was in the original DB and that's what I did. But when I combined them 2 happened what I described in my other messages. The crazy thing is that the teams from L1 to national 2 had the original db colours but in all others I could see the changes I've made, that drives me mad. Anyway after I found a solution and I discarded all the changes I've made in those teams and now I can see the changes. Very confusing but anyway.... Link to post Share on other sites More sharing options...
rusty217 Posted April 11, 2023 Share Posted April 11, 2023 8 hours ago, vourtsio said: So, when I started the History fix file I also edited the colors of all teams from Ligue 1 - National 2, after this the idea of the colour changes file was born. Now yesterday I thought to revert the colours in the History fix file as it was in the original DB and that's what I did. But when I combined them 2 happened what I described in my other messages. The crazy thing is that the teams from L1 to national 2 had the original db colours but in all others I could see the changes I've made, that drives me mad. Anyway after I found a solution and I discarded all the changes I've made in those teams and now I can see the changes. Very confusing but anyway.... Ah yeah, I was gonna say you need to actually remove the changes, not just reverse them. Link to post Share on other sites More sharing options...
ianvou Posted April 11, 2023 Share Posted April 11, 2023 5 hours ago, rusty217 said: Ah yeah, I was gonna say you need to actually remove the changes, not just reverse them. Yeah my English maybe are not the best. I just picked all the last changes I did and I removed them. Anyway it worked but now it seems that if I want to change a colour in one of these teams I will have to do it in both files 😂😂😂. Anyway for the moment it's solved Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now